About Us  »  Equipment  »  Camera  »  STL11000M       [Page 5 of 6] :: Jump To  
   





Camera


STL11000M




 

SBIG STL11000M


SBIG STL11000M Images
    SBIG STL11000M

      Santa Barbara Instrument Group
      http://www.sbig.com/
      147-A Castilian Drive
      Santa Barbara, CA 93117
      USA
      Telephone: 1 (805) 571-7244
      Fax: 1 (805) 571-1147
      E-mail: sbig@sbig.com
Specifications
  1. Weight: 4 pounds.
  2. Dimensions: 6.5 x 6 x 3.5 inches (16.5 x 15.2 x 8.9 cm) excluding nosepiece and handles
  3. Weight: Approx. 4 lbs. (1.8kg) without filters
  4. Computer Interface: USB 1.1 (transfer rate approx. 425,000 pixels/second)
  5. Telescope Interface: Threaded accessory ring, mounting plate and 2" nosepiece supplied, Nikon 35mm lens adapter optional
  6. Filter Wheel: 5 position internal carousel accepts 48mm threaded filter cells and 2" unmounted round filters
  7. Shutter: Internal Mechanical Shutter on all cameras, plus electronic shutter on Interline CCDs
  8. Cooling: 2 stage thermoelectric, water circulation, - 40o C below ambient with uncooled water, regulated to +/- 0.1 degree (~32C air only). Further cooling may be achieved by using water cooled below ambient and above the dew point.
  9. Backfocus: Approximately 1.7 inches +/- 0.1 inches (~4.3 cm +/- 0.25 cm) with 2" nosepiece attached
  10. Power Requirements: 10 - 18VDC, 12VDC nominal, Universal AC to 12VDC desktop supply and 12VDC field power cord supplied
  11. Carrying Case: Pelican 1550 Case with custom cut foam insert
  12. Software: CCDOPS ver. 5.xx, CCDSoftV5, CCDSharp, TheSky v.5, level II.
copyright © 2007, 2013 Robert A. Antol